Edayapalayam (KAS Exports) 0.25 MW wind project wind project was installed in Tamil Nadu, India It was brought online in 2005 and is owned by KAS Exports.
It is near Coimbatore.
See below for data.
Generally speaking, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
The best destination for something such as Edayapalayam (KAS Exports) 0.25 MW wind project would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine KAS Exports like KAS Exports associated if Edayapalayam (KAS Exports) 0.25 MW wind project was not built near local demand or transmission capaCoimbatore.
Before development, Edayapalayam (KAS Exports) 0.25 MW wind project was most likely screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site data around Coimbatore would have been a major element in the development final decision Local winds are often checked for a year or more, and comprehensive wind maps made before wind generators are set up.
The wind hits quicker at higher altitudes as a result of reduced influence of drag. The surge in velocity with altitude is most remarkable near the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is also more pronounced near land and is changed by terrain, surface and hurdles.
Ordinarily, the increase of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing maximizes placement, specially in hilly areas.
Edayapalayam (KAS Exports) 0.25 MW wind project turbines are linked via medium voltage lines and communications.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each turbine site.