Edayapalayam (Karthikai Textile Mills) 0.6MW wind project wind project was installed in Tamil Nadu, India It was brought online in 2007 and is owned by Karthikai Textile Mills.
It is near Coimbatore.
See below for data.
As a general rule, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The very best destination for something like Edayapalayam (Karthikai Textile Mills) 0.6MW wind project is a steady supply of non-turbulent wind. An important factor of turbine siting is also access to local demand or transmission capaCoimbatore.
Before construction, Edayapalayam (Karthikai Textile Mills) 0.6MW wind project was almost certainly screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Site information around Coimbatore would have been a major factor in the ‘development’ decision Local winds are often monitored for a year or more, and detailed wind maps built before wind generators are installed.
Altitude would also possess a part to performin a project like Edayapalayam (Karthikai Textile Mills) 0.6MW wind project. This is due to drag The surge in velocity with altitude is most extraordinary close to the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and it is more evident near land and is changed by landscape, surface and hurdles.
Usually, the increase of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. However this may not be the case in hilly areas.
Edayapalayam (Karthikai Textile Mills) 0.6MW wind project turbines are connected via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each and every turbine site.