Dindigul (K S Oils Limited) 2.4MW wind project wind project was installed in Tamil Nadu, India It was brought online in 2009 and is owned by KS Oils Ltd.
It is near Pushpattur.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something similar to Dindigul (K S Oils Limited) 2.4MW wind project is a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine KS Oils Ltd like KS Oils Ltd included if Dindigul (K S Oils Limited) 2.4MW wind project was not built near local demand or transmission capaPushpattur.
Before development, Dindigul (K S Oils Limited) 2.4MW wind project was most likely screened on the basis of a wind atlas, and validated with wind specifications. However, Dindigul (K S Oils Limited) 2.4MW wind project wind farm would have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential in order to fund the project. Winds around Pushpattur are evaluated for at least a year or so plus the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performin a project like Dindigul (K S Oils Limited) 2.4MW wind project. This is because of drag The increase in velocity with altitude is most remarkable near the surface and is affected by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is also more pronounced near land and is changed by terrain, surface and obstructions.
Generally, the rise of wind speeds with escalating elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the expected wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Individual turbines at Dindigul (K S Oils Limited) 2.4MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each turbine site.