Dhule (Sheetal Manufacturing Company) 1.25MW wind project wind project was installed in Maharashtra, India It was created in 2005 and is owned by Sheetal Manufacturing Company.
It is near Dhule.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best location for something like Dhule (Sheetal Manufacturing Company) 1.25MW wind project would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is moreover admittance to local demand or transmission capaDhule.
Before building, Dhule (Sheetal Manufacturing Company) 1.25MW wind project was probably screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for correct siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been imperative to determining site potential to be able to finance the project. Winds around Dhule are evaluated for over a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind hits faster at greater altitudes because of the reduced influence of drag. The rise in velocity with altitude is most spectacular at the surface and is impacted by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is more obvious near land and is changed by topography, surface and hurdles.
Wind speeds increasing with altitude is part of a wind energy law. This Maharashtras wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they don’t affect one another. But this is not always the way it is in hilly areas.
Individual turbines at Dhule (Sheetal Manufacturing Company) 1.25MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Dhule (Sheetal Manufacturing Company) 1.25MW wind project wind farm
- Name: Dhule (Sheetal Manufacturing Company) 1.25MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S66 1.25MW, Units: 5,
- Country: India
- Developer: Suzlon Energy
- State: Maharashtra
- City: Dhule
- Owner: Sheetal Manufacturing Company