Dhule/Nandurbar(DFPC) wind power project wind farm is situated in Maharashtra, India. It was finished in 2006 and is owned by Deepak Ferti & Petrochem Corpn LTd.
It is near Dhule.
See below for data.
Generally speaking, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or bigger.
A great place for a project like Dhule/Nandurbar(DFPC) wind power project would have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden potent bursts of wind. An essential aspect of turbine siting is also access to local requirement or transmission capaDhule.
During the planning stages the Dhule/Nandurbar(DFPC) wind power project wind farm would’ve been checked and confirmed through wind measurements. However, Dhule/Nandurbar(DFPC) wind power project wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction could have been crucial to determining site potential as a way to finance the project. Winds around Dhule are examined for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind blows more quickly at higher altitudes because of the reduced effect of drag. The rise in velocity with altitude is most spectacular at the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and is also more evident near land and is transformed by landscape, surface and hurdles.
Almost always, the increase of wind speeds with increasing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Dhule/Nandurbar(DFPC) wind power project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is enhanced in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Dhule/Nandurbar(DFPC) wind power project wind farm
- Name: Dhule/Nandurbar(DFPC) wind power project
- Wind turbine Supplier: Suzlon Energy, Model: 1.25MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Maharashtra
- City: Dhule
- Owner: Deepak Ferti & Petrochem Corpn LTd