Dhule (Advik Hi-Tech) 1.25 MW Wind Project wind project was installed in Maharashtra, India It was created in 2006 and is owned by Advik Hi-Tech Pvt. Ltd.
It is near Dhule.
See below for data.
Generally speaking, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
The very best location for something similar to Dhule (Advik Hi-Tech) 1.25 MW Wind Project would be a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Advik Hi-Tech Pvt. Ltd like Advik Hi-Tech Pvt. Ltd involved if Dhule (Advik Hi-Tech) 1.25 MW Wind Project was not built near local demand or transmission capaDhule.
Before development, Dhule (Advik Hi-Tech) 1.25 MW Wind Project was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for exact siting of a large wind power project.
Site info around Dhule is a major element in the ‘development’ choice Local winds are frequently examined for a year or more, and detailed wind maps built before wind generators are installed.
Altitude would also have a part to performin a project like Dhule (Advik Hi-Tech) 1.25 MW Wind Project. This is due to drag The rise in velocity with altitude is most spectacular close to the surface and is impacted by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is transformed by landscape, surface and obstructions.
Usually, the rise of wind speeds with escalating height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, increases the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. However this might not be the case in hilly areas.
Individual turbines at Dhule (Advik Hi-Tech) 1.25 MW Wind Project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably roads to every turbine site.
Facts about Dhule (Advik Hi-Tech) 1.25 MW Wind Project wind farm
- Name: Dhule (Advik Hi-Tech) 1.25 MW Wind Project
- Wind turbine Supplier: Suzlon Energy, Model: S64 1.25MW, Units: 24,
- Country: India
- Developer: Suzlon Energy
- State: Maharashtra
- City: Dhule
- Owner: Advik Hi-Tech Pvt. Ltd