Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project wind farm is situated in Tamil Nadu, India. It was completed in 2010 and is owned by VKSM Cotton Mills.
It is near Dharapuram.
See below for data.
In most cases, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best destination for something similar to Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project would be a steady availability of non-turbulent wind. An important factor of turbine siting is furthermore admission to local demand or transmission capaDharapuram.
During the planning stages the Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential to be able to fund the project. Local winds are frequently supervised for a year or more, and comprehensive wind maps built before wind generators are set up.
The wind blows more rapidly at higher altitudes due to the reduced effect of drag. The surge in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and is more evident near land and is transformed by landscape, surface and obstacles.
Wind speeds raising with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project wind farm
- Name: Dharapuram (VKSM Cotton Mills P. Ltd) 0.8 MW wind project
- Wind turbine Supplier: Enercon, Model: E52 0.8MW, Units: 1,
- Country: India
- Developer: Enercon
- State: Tamil Nadu
- City: Dharapuram
- Owner: VKSM Cotton Mills