Dharapuram (Madras Cement Ltd) 3.2MW Wind Project wind project was set up in Tamil Nadu, India It was brought online in 2010 and is owned by Madras Cement Ltd.
It is near .
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or more.
The best position for a project like Dharapuram (Madras Cement Ltd) 3.2MW Wind Project might have a near constant flow of non-turbulent wind throughout the year, having a minimum chance of sudden effective bursts of wind. An important factor of turbine siting is furthermore access to local demand or transmission capa.
Before construction, Dharapuram (Madras Cement Ltd) 3.2MW Wind Project was most likely screened on the basis of a wind atlas, and validated with wind specifications. However, Dharapuram (Madras Cement Ltd) 3.2MW Wind Project wind farm might have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential to be able to fund the project. Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are set up.
The wind hits quicker at greater altitudes because of the reduced effect of drag. The surge in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is more obvious near land and is transformed by landscape, surface and obstructions.
Sometimes, the increase of wind speeds with raising elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, raises the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. However this isn’t necessarily the way it is in hilly areas.
Dharapuram (Madras Cement Ltd) 3.2MW Wind Project turbines are linked via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is increased in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and probably access roads to each turbine site.
Facts about Dharapuram (Madras Cement Ltd) 3.2MW Wind Project wind farm
- Name: Dharapuram (Madras Cement Ltd) 3.2MW Wind Project
- Wind turbine Supplier: Enercon India, Model: 0.8MW, Units: 4,
- Country: India
- Developer: Enercon India
- State: Tamil Nadu
- Owner: Madras Cement Ltd