Dhankarkulam (VSM Weaves) 0.75 MW wind project wind farm is located in Tamil Nadu, India. It was finished in 2005 and is owned by VSM Weaves India Limited.
It is near Tirunelveli.
See below for data.
As a rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
The best destination for something like Dhankarkulam (VSM Weaves) 0.75 MW wind project is a steady supply of non-turbulent wind. An important factor of turbine siting is furthermore access to local demand or transmission capaTirunelveli.
During the planning stages the Dhankarkulam (VSM Weaves) 0.75 MW wind project wind farm would’ve been checked and validated through wind measurements. However, Dhankarkulam (VSM Weaves) 0.75 MW wind project wind farm would have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential as a way to finance the project. Local winds are frequently checked for a year or more, and comprehensive wind maps constructed before wind generators are set up.
The wind blows faster at higher altitudes due to the reduced effect of drag. The surge in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is also more obvious near land and is transformed by terrain, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This Tamil Nadus wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing increases placement, specifically in hilly areas.
Dhankarkulam (VSM Weaves) 0.75 MW wind project turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and probably roads to each turbine site.
Facts about Dhankarkulam (VSM Weaves) 0.75 MW wind project wind farm
- Name: Dhankarkulam (VSM Weaves) 0.75 MW wind project
- Wind turbine Supplier: NEPC Micon, Model: 0.225MW, Units: 12,
- Country: India
- Developer: Neg Micon
- State: Tamil Nadu
- City: Tirunelveli
- Owner: VSM Weaves India Limited