Dhank (Elecon Engineering) 1.2MW wind project wind project was installed in Gujarat, India It was created in 1995 and is owned by Elecon Engineering.
It is near Rajkot.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The very best location for something similar to Dhank (Elecon Engineering) 1.2MW wind project would be a steady supply of non-turbulent wind. An important factor of turbine siting is moreover access to local demand or transmission capaRajkot.
Before construction, Dhank (Elecon Engineering) 1.2MW wind project was almost certainly screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential in order to fund the project. Local winds are frequently watched for a year or more, and comprehensive wind maps made before wind generators are installed.
Altitude would also have a part to playwithin a project like Dhank (Elecon Engineering) 1.2MW wind project. This is due to drag The rise in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity grows with altitude and is also more evident near land and is transformed by topography, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, increases the predicted wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Dhank (Elecon Engineering) 1.2MW wind project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Dhank (Elecon Engineering) 1.2MW wind project wind farm
- Name: Dhank (Elecon Engineering) 1.2MW wind project
- Wind turbine Supplier: NEPC Micon, Model: 0.225MW, Units: 8,
- Country: India
- Developer: Elecon Engineering
- State: Gujarat
- City: Rajkot
- Owner: Elecon Engineering