Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project wind farm is located in Tamil Nadu, India. It was completed in 2003 and is owned by Sornalakshmi Spinning Mills Private Limited.
It is near Tirunelveli.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The very best destination for something like Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project would be a steady availability of non-turbulent wind. Additionally, you wouldn’t get a turbine Sornalakshmi Spinning Mills Private Limited like Sornalakshmi Spinning Mills Private Limited associated if Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project was not built near local demand or transmission capaTirunelveli.
Before development, Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site information around Tirunelveli is a major factor in the development choice Local winds are frequently supervised for a year or more, and comprehensive wind maps made before wind generators are set up.
The wind hits speedier at higher altitudes because of the reduced influence of drag. The surge in velocity with altitude is most dramatic near the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is more evident near land and is altered by terrain, surface and obstructions.
Ordinarily, the rise of wind speeds with growing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, boosts the expected wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing maximizes placement, specifically in hilly areas.
Individual turbines at Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to every turbine site.
Facts about Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project wind farm
- Name: Dhanakarkulam (Sornalakshmi Mills) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S70 1.25MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Sornalakshmi Spinning Mills Private Limited