Dhanakarkulam (Saravana Mills) 5 MW wind project wind project was set up in Tamil Nadu, India It was brought online in 2003 and is owned by Saravana Spinning Mills Limited.
It is near Tirunelveli.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The best destination for a project like Dhanakarkulam (Saravana Mills) 5 MW wind project might have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden powerful bursts of wind. Additionally, you wouldn’t get a turbine Saravana Spinning Mills Limited like Saravana Spinning Mills Limited included if Dhanakarkulam (Saravana Mills) 5 MW wind project was not built near local demand or transmission capaTirunelveli.
Before building, Dhanakarkulam (Saravana Mills) 5 MW wind project was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Site info around Tirunelveli would have been a major element in the ‘development’ choice Winds around Tirunelveli are examined for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Dhanakarkulam (Saravana Mills) 5 MW wind project. This is because of drag The increase in velocity with altitude is most dramatic at the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and it is more distinct near land and is altered by geography, surface and limitations.
Wind speeds escalating with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Dhanakarkulam (Saravana Mills) 5 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is enhanced in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each turbine site.
Facts about Dhanakarkulam (Saravana Mills) 5 MW wind project wind farm
- Name: Dhanakarkulam (Saravana Mills) 5 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 0.6MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Saravana Spinning Mills Limited