Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project wind project was set up in Tamil Nadu, India It was completed in 2003 and is owned by Amstrong Knitting Mills.
It is near Tirunelveli.
See below for data.
As a general rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or larger.
A great place for a project like Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project could have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of abrupt effective bursts of wind. An essential aspect of turbine siting is also access to local demand or transmission capaTirunelveli.
During the planning stages the Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project wind farm would’ve been checked and authenticated through wind measurements. However, Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project wind farm might have needed more than just meteorological data and measurements.
Site information around Tirunelveli is a major element in the ‘development’ conclusion Local winds are frequently examined for a year or more, and detailed wind maps created before wind generators are set up.
The wind blows speedier at greater altitudes due to the reduced effect of drag. The surge in velocity with altitude is most dramatic near the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is also more obvious near land and is changed by landscape, surface and hurdles.
Usually, the rise of wind speeds with increasing height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. But this is not always the situation in hilly areas.
Individual turbines at Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project wind farm
- Name: Dhanakarkulam (Amstrong Knitting) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 0.6MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Amstrong Knitting Mills