Dhalgaon (Arvind Dyeing) 1.25 MW wind project wind farm is situated in Maharashtra, India. It was brought online in 2006 and is owned by Arvind Dyeing & Bleaching Mills Private Limited.
It is near Satara.
See below for data.
For the most part, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The very best destination for something such as Dhalgaon (Arvind Dyeing) 1.25 MW wind project is a steady availability of non-turbulent wind. An essential aspect of turbine siting is also admission to local requirement or transmission capaSatara.
During the planning stages the Dhalgaon (Arvind Dyeing) 1.25 MW wind project wind farm would’ve been checked and endorsed through wind measurements. However, Dhalgaon (Arvind Dyeing) 1.25 MW wind project wind farm would have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been important to determining site potential to be able to finance the project. Local winds are often examined for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also have a part to performin a project like Dhalgaon (Arvind Dyeing) 1.25 MW wind project. This is because of drag The surge in velocity with altitude is most extraordinary at the surface and is affected by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more evident near land and is changed by terrain, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, boosts the anticipated wind speeds by 10%, and the estimated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. However this is not always the way it is in hilly areas.
Individual turbines at Dhalgaon (Arvind Dyeing) 1.25 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.
Facts about Dhalgaon (Arvind Dyeing) 1.25 MW wind project wind farm
- Name: Dhalgaon (Arvind Dyeing) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S70 1.25MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Maharashtra
- City: Satara
- Owner: Arvind Dyeing & Bleaching Mills Private Limited