Dhalgaon (Arvind Dyeing) 0.6 MW Wind project wind farm is situated in Maharashtra, India. It was created in 2006 and is owned by Arvind Dyeing & Bleaching Mills Private Limited.
It is near Satara.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A great place for a project like Dhalgaon (Arvind Dyeing) 0.6 MW Wind project might have a near constant flow of non-turbulent wind throughout the year, with a minimum likelihood of abrupt effective bursts of wind. An essential aspect of turbine siting is furthermore admittance to local requirement or transmission capaSatara.
Before construction, Dhalgaon (Arvind Dyeing) 0.6 MW Wind project was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been important to determining site potential in order to fund the project. Local winds are often supervised for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also have a part to playin a project like Dhalgaon (Arvind Dyeing) 0.6 MW Wind project. This is due to drag The increase in velocity with altitude is most dramatic close to the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is also more obvious near land and is changed by terrain, surface and obstructions.
Normally, the growth of wind speeds with raising height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, increases the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. But micrositing maximizes placement, specifically in hilly areas.
Individual turbines at Dhalgaon (Arvind Dyeing) 0.6 MW Wind project are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Dhalgaon (Arvind Dyeing) 0.6 MW Wind project wind farm
- Name: Dhalgaon (Arvind Dyeing) 0.6 MW Wind project
- Wind turbine Supplier: Suzlon Energy, Model: S66 1.25MW, Units: 12,
- Country: India
- Developer: Suzlon Energy
- State: Maharashtra
- City: Satara
- Owner: Arvind Dyeing & Bleaching Mills Private Limited