Devarkulam (Revathi Equipments) 1.25 MW wind project wind project was installed in Tamil Nadu, India It was brought online in 2005 and is owned by Revathi Equipment Limited.
It is near Tirunelveli.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
An ideal place for a project like Devarkulam (Revathi Equipments) 1.25 MW wind project could have a near constant flow of non-turbulent wind throughout the year, with a minimum likelihood of abrupt effective bursts of wind. An essential aspect of turbine siting is furthermore admission to local demand or transmission capaTirunelveli.
Before building, Devarkulam (Revathi Equipments) 1.25 MW wind project was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not enough for accurate siting of a large wind power project.
Site information around Tirunelveli is a major element in the development choice Winds around Tirunelveli are analysed for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also have a part to playin a project like Devarkulam (Revathi Equipments) 1.25 MW wind project. This is because of drag The boost in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is altered by topography, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the expected power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But this isn’t necessarily the situation in hilly areas.
Devarkulam (Revathi Equipments) 1.25 MW wind project turbines are linked via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Devarkulam (Revathi Equipments) 1.25 MW wind project wind farm
- Name: Devarkulam (Revathi Equipments) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S70 1.25MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Revathi Equipment Limited