Devarkulam (Kamal Engineering) 1.25 MW wind project wind farm is situated in Tamil Nadu, India. It was brought online in 2005 and is owned by Kamal Engineering Corporation.
It is near Tirunelveli.
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best position for a project like Devarkulam (Kamal Engineering) 1.25 MW wind project could have a near constant flow of non-turbulent wind all year round, having a minimum likelihood of sudden effective bursts of wind. Additionally, you would not get a turbine Kamal Engineering Corporation like Kamal Engineering Corporation included if Devarkulam (Kamal Engineering) 1.25 MW wind project was not built near local demand or transmission capaTirunelveli.
During the planning stages the Devarkulam (Kamal Engineering) 1.25 MW wind project wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Site info around Tirunelveli would have been a major aspect in the development choice Local winds are often supervised for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also have a part to performin a project like Devarkulam (Kamal Engineering) 1.25 MW wind project. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is transformed by topography, surface and obstacles.
Sometimes, the increase of wind speeds with escalating height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, raises the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect one another. But this is not always the way it is in hilly areas.
Devarkulam (Kamal Engineering) 1.25 MW wind project turbines are related via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to every turbine site.
Facts about Devarkulam (Kamal Engineering) 1.25 MW wind project wind farm
- Name: Devarkulam (Kamal Engineering) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S66 1.25MW, Units: 20,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Kamal Engineering Corporation