Devarkulam (Idupulapadu Mills) 1.5 MW wind project wind project was installed in Tamil Nadu, India It was in fact brought online in 2009 and is owned by Idupulapadu Cotton Mills Limited.
It is near Tirunelveli.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or higher.
A perfect destination for a project like Devarkulam (Idupulapadu Mills) 1.5 MW wind project would have a near constant flow of non-turbulent wind throughout the year, with a minimum chances of sudden potent bursts of wind. Additionally, you wouldn’t get a turbine Idupulapadu Cotton Mills Limited like Idupulapadu Cotton Mills Limited involved if Devarkulam (Idupulapadu Mills) 1.5 MW wind project was not built near local demand or transmission capaTirunelveli.
Before construction, Devarkulam (Idupulapadu Mills) 1.5 MW wind project was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Site information around Tirunelveli would have been a major aspect in the ‘development’ final decision Winds around Tirunelveli are analysed for over a year or so plus the development of detailed maps. Only then are wind turbines installed.
The wind hits more rapidly at greater altitudes because of the reduced influence of drag. The increase in velocity with altitude is most extraordinary at the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity grows with altitude and it is more evident near land and is altered by terrain, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect each other. However this is not always the case in hilly areas.
Devarkulam (Idupulapadu Mills) 1.5 MW wind project turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Devarkulam (Idupulapadu Mills) 1.5 MW wind project wind farm
- Name: Devarkulam (Idupulapadu Mills) 1.5 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 1.25MW, Units: 8,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Idupulapadu Cotton Mills Limited