Devarkulam (Aditya Marine) 1.25 MW wind project wind farm is situated in Tamil Nadu, India. It was created in 2009 and is owned by Aditya Marine Ltd.
It is near DevarKulam,Tirunelveli.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best location for a project like Devarkulam (Aditya Marine) 1.25 MW wind project might have a near constant flow of non-turbulent wind throughout the year, with a minimum likelihood of sudden effective bursts of wind. An important factor of turbine siting is moreover admittance to local demand or transmission capaDevarKulam,Tirunelveli.
Before development, Devarkulam (Aditya Marine) 1.25 MW wind project was almost certainly screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for accurate siting of a large wind power project.
Site information around DevarKulam,Tirunelveli is a major factor in the ‘development’ choice Local winds are frequently examined for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also have a part to playin a project like Devarkulam (Aditya Marine) 1.25 MW wind project. This is due to drag The boost in velocity with altitude is most extraordinary near the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more obvious near land and is changed by topography, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Individual turbines at Devarkulam (Aditya Marine) 1.25 MW wind project are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each turbine site.
Facts about Devarkulam (Aditya Marine) 1.25 MW wind project wind farm
- Name: Devarkulam (Aditya Marine) 1.25 MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: S82 1.5 MW, Units: 5,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: DevarKulam,Tirunelveli
- Owner: Aditya Marine Ltd