Dasarpatti (Sudhan Mills) 3 MW wind project wind farm is located in Tamil Nadu, India. It was brought online in 2002 and is owned by Sudhan Spinning Mills Private Limited.
It is near Coimbatore.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or higher.
The best position for a project like Dasarpatti (Sudhan Mills) 3 MW wind project might have a near constant flow of non-turbulent wind all year long, having a minimum likelihood of sudden effective bursts of wind. An important factor of turbine siting is also admission to local requirement or transmission capaCoimbatore.
Before construction, Dasarpatti (Sudhan Mills) 3 MW wind project was most likely screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been imperative to determining site potential in order to fund the project. Local winds are frequently supervised for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind hits faster at higher altitudes due to the reduced influence of drag. The increase in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more distinct near land and is altered by landscape, surface and obstructions.
Almost always, the increase of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But micrositing optimizes placement, specifically in hilly areas.
Individual turbines at Dasarpatti (Sudhan Mills) 3 MW wind project are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and probably access roads to every turbine site.
Facts about Dasarpatti (Sudhan Mills) 3 MW wind project wind farm
- Name: Dasarpatti (Sudhan Mills) 3 MW wind project
- Wind turbine Supplier: Neg Micon, Model: 0.75MW, Units: 2,
- Country: India
- Developer: Neg Micon
- State: Tamil Nadu
- City: Coimbatore
- Owner: Sudhan Spinning Mills Private Limited