Dasarpatti (Prabhu Spinning) 1.5 MW wind project wind farm is located in Tamil Nadu, India. It was finished in 2003 and is owned by Prabhu Spinning Mills Private Limited.
It is near Coimbatore.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
The best place for a project like Dasarpatti (Prabhu Spinning) 1.5 MW wind project could have a near constant flow of non-turbulent wind all year long, having a minimum probability of sudden effective bursts of wind. Additionally, you would not get a turbine Prabhu Spinning Mills Private Limited like Prabhu Spinning Mills Private Limited associated if Dasarpatti (Prabhu Spinning) 1.5 MW wind project was not built near local demand or transmission capaCoimbatore.
During the planning stages the Dasarpatti (Prabhu Spinning) 1.5 MW wind project wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction could have been important to determining site potential as a way to fund the project. Winds around Coimbatore are analysed for at least a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
The wind hits quicker at higher altitudes due to the reduced influence of drag. The rise in velocity with altitude is most extraordinary at the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is also more distinct near land and is altered by terrain, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Dasarpatti (Prabhu Spinning) 1.5 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Dasarpatti (Prabhu Spinning) 1.5 MW wind project wind farm
- Name: Dasarpatti (Prabhu Spinning) 1.5 MW wind project
- Wind turbine Supplier: Fuhrlander, Model: 1.3MW, Units: 4,
- Country: India
- Developer: Neg Micon
- State: Tamil Nadu
- City: Coimbatore
- Owner: Prabhu Spinning Mills Private Limited