Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project wind farm is situated in Tamil Nadu, India. It was completed in 2009 and is owned by PSK Engineering Construction & Co.
It is near Coimbatore.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
The best destination for something like Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project would be a steady availability of non-turbulent wind. An essential aspect of turbine siting is furthermore admission to local requirement or transmission capaCoimbatore.
During the planning stages the Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project wind farm would have been checked and confirmed through wind measurements. Meteorological wind data alone is usually not adequate for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been important to determining site potential as a way to fund the project. Winds around Coimbatore are analysed for at least a year or so plus the introduction of detailed maps. Only then are wind turbines installed.
The wind blows quicker at greater altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity grows with altitude and is more distinct near land and is transformed by landscape, surface and obstructions.
Generally, the rise of wind speeds with increasing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, enhances the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so they really don’t affect one another. But this is not always the way it is in hilly areas.
Individual turbines at Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly access roads to every turbine site.
Facts about Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project wind farm
- Name: Coimbatore (PSK Engineering Construction & Co) 1.5 MW wind project
- Wind turbine Supplier: Vestas RRB, Model: 0.6MW, Units: 2,
- Country: India
- Developer: Suzlon Energy
- State: Tamil Nadu
- City: Coimbatore
- Owner: PSK Engineering Construction & Co