Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project wind project was installed in Tamil Nadu, India It was finished in 2006 and is owned by Hi-Tech Arai Limited.
It is near Coimbatore.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A great destination for a project like Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project could have a near constant flow of non-turbulent wind all year long, having a minimum chances of abrupt effective bursts of wind. An important factor of turbine siting is moreover admission to local demand or transmission capaCoimbatore.
Before building, Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project was most likely screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction might have been important to determining site potential in order to fund the project. Local winds are frequently watched for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind blows more rapidly at higher altitudes because of the reduced effect of drag. The boost in velocity with altitude is most extraordinary close to the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity rises with altitude and is more obvious near land and is altered by geography, surface and obstructions.
Typically, the rise of wind speeds with increasing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect each other. However this is not always the case in hilly areas.
Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project turbines are linked via medium voltage lines and communications.
At a substation, that medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps access roads to each turbine site.
Facts about Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project wind farm
- Name: Coimbatore (Hi-Tech Arai Limited) 1.2MW wind project
- Wind turbine Supplier: Clipper Windpower, Model: 2.5MW, Units: 50,
- Country: India
- Developer: Vestas RRB
- State: Tamil Nadu
- City: Coimbatore
- Owner: Hi-Tech Arai Limited