Chitradurga (Abletech) 1.6MW wind project wind farm is located in Karnataka, India. It was in fact brought online in 2005 and is owned by Abletech Electro Engineers Pvt. Ltd.
It is near Holakere, Chitradurga.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
An ideal position for a project like Chitradurga (Abletech) 1.6MW wind project could have a near constant flow of non-turbulent wind year round, with a minimum chance of sudden effective bursts of wind. Additionally, you would not get a turbine Abletech Electro Engineers Pvt. Ltd like Abletech Electro Engineers Pvt. Ltd included if Chitradurga (Abletech) 1.6MW wind project was not built near local demand or transmission capaHolakere, Chitradurga.
During the planning stages the Chitradurga (Abletech) 1.6MW wind project wind farm would have been checked and validated through wind measurements. However, Chitradurga (Abletech) 1.6MW wind project wind farm would have needed more than simply meteorological data and measurements.
Site information around Holakere, Chitradurga is a major aspect in the ‘development’ conclusion Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are set up.
The wind blows more quickly at greater altitudes because of the reduced effect of drag. The surge in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and is also more evident near land and is changed by landscape, surface and limitations.
Wind speeds growing with altitude is part of a wind energy law. This Karnatakas wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Chitradurga (Abletech) 1.6MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Chitradurga (Abletech) 1.6MW wind project wind farm
- Name: Chitradurga (Abletech) 1.6MW wind project
- Wind turbine Supplier: Wind World (India), Model: E35 0.6MW, Units: 11,
- Country: India
- Developer: Wind World (India)
- State: Karnataka
- City: Holakere, Chitradurga
- Owner: Abletech Electro Engineers Pvt. Ltd