Chinnaputhur (SITL) 8 MW wind project wind farm is situated in Tamil Nadu, India. It was completed in 2004 and is owned by Sree Ishwarya Textiles Ltd.
It is near Chinnaputhur, Erode.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best position for a project like Chinnaputhur (SITL) 8 MW wind project would have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden potent bursts of wind. An important factor of turbine siting is furthermore admittance to local requirement or transmission capaChinnaputhur, Erode.
Before building, Chinnaputhur (SITL) 8 MW wind project was probably screened on the basis of a wind atlas, and validated with wind measurements. However, Chinnaputhur (SITL) 8 MW wind project wind farm might have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction might have been imperative to determining site potential in order to fund the project. Local winds are frequently checked for a year or more, and detailed wind maps created before wind generators are installed.
The wind blows more rapidly at greater altitudes as a result of reduced effect of drag. The surge in velocity with altitude is most spectacular close to the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more evident near land and is altered by topography, surface and hurdles.
Typically, the growth of wind speeds with raising height follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, boosts the anticipated wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But this might not be the situation in hilly areas.
Individual turbines at Chinnaputhur (SITL) 8 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is elevated in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each turbine site.