Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project wind project was set up in Tamil Nadu, India It was finished in 2005 and is owned by Ennore Foundries Ltd.
It is near Tirunelveli.
See below for data.
For the most part, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or more.
The best location for a project like Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project might have a near constant flow of non-turbulent wind throughout the year, having a minimum chance of abrupt powerful bursts of wind. An essential aspect of turbine siting is also admittance to local demand or transmission capaTirunelveli.
During the planning stages the Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project wind farm would have been checked and authenticated through wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Assortment of site-specific data for wind speed and direction would have been vital to determining site potential to be able to fund the project. Local winds are frequently watched for a year or more, and detailed wind maps created before wind generators are installed.
The wind hits swifter at higher altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most spectacular near the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and is also more pronounced near land and is altered by landscape, surface and limitations.
Wind speeds raising with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But micrositing maximizes placement, particularly in hilly areas.
Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project turbines are linked via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly roads to every turbine site.
Facts about Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project wind farm
- Name: Chidambarampuram (Ennore Foundries Ltd) 0.225MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 1.25MW, Units: 1,
- Country: India
- Developer: NEPC India
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Ennore Foundries Ltd