Chavaneshwar (PCTL) 12.8 MW wind farm wind project was set up in Maharashtra, India It was in fact brought online in 2010 and is owned by Paharpur Cooling Towers Ltd.
It is near Satara.
See below for data.
In most cases, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or higher.
A perfect destination for a project like Chavaneshwar (PCTL) 12.8 MW wind farm would have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of abrupt effective bursts of wind. An important factor of turbine siting is furthermore access to local requirement or transmission capaSatara.
During the planning stages the Chavaneshwar (PCTL) 12.8 MW wind farm wind farm would’ve been checked and validated through wind measurements. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential as a way to fund the project. Winds around Satara are evaluated for at least a year or so plus the creation of detailed maps. Only then are wind turbines installed.
The wind hits swifter at greater altitudes as a result of reduced effect of drag. The rise in velocity with altitude is most extraordinary near the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is transformed by geography, surface and hurdles.
Sometimes, the growth of wind speeds with raising elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the height of a turbine, then, enhances the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But this may not be the situation in hilly areas.
Individual turbines at Chavaneshwar (PCTL) 12.8 MW wind farm are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to every turbine site.
Facts about Chavaneshwar (PCTL) 12.8 MW wind farm wind farm
- Name: Chavaneshwar (PCTL) 12.8 MW wind farm
- Wind turbine Supplier: Enercon India, Model: 0.8MW, Units: 1,
- Country: India
- Developer: Wind World (India)
- State: Maharashtra
- City: Satara
- Owner: Paharpur Cooling Towers Ltd