Chavaneshwar (J M Industries) 0.8 MW wind project wind farm is located in Maharashtra, India. It was completed in 2010 and is owned by J M Industries.
It is near Satara.
See below for data.
In most cases, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or more.
The very best destination for something like Chavaneshwar (J M Industries) 0.8 MW wind project would be a steady availability of non-turbulent wind. An important factor of turbine siting is also access to local requirement or transmission capaSatara.
During the planning stages the Chavaneshwar (J M Industries) 0.8 MW wind project wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not ample for exact siting of a large wind power project.
Site data around Satara is a major aspect in the development final decision Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also have a part to playin a project like Chavaneshwar (J M Industries) 0.8 MW wind project. This is because of drag The increase in velocity with altitude is most dramatic near the surface and is impacted by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is more evident near land and is transformed by landscape, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the altitude of a turbine, then, enhances the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is set between each turbine in a fully developed wind farm. But micrositing increases placement, particularly in hilly areas.
Chavaneshwar (J M Industries) 0.8 MW wind project turbines are related via medium voltage lines and communications.
At a substation, this kind of medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Chavaneshwar (J M Industries) 0.8 MW wind project wind farm
- Name: Chavaneshwar (J M Industries) 0.8 MW wind project
- Wind turbine Supplier: DeWind, Model: 0.490MW, Units: 1,
- Country: India
- Developer: Wind World (India)
- State: Maharashtra
- City: Satara
- Owner: J M Industries