Chavaneshwar (C P Patel) 0.8MW wind project wind farm is located in Maharashtra, India. It was in fact brought online in 2012 and is owned by C P Patel.
It is near Satara.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A great location for a project like Chavaneshwar (C P Patel) 0.8MW wind project would have a near constant flow of non-turbulent wind year round, with a minimum chances of abrupt powerful bursts of wind. Additionally, you would not get a turbine C P Patel like C P Patel associated if Chavaneshwar (C P Patel) 0.8MW wind project was not built near local demand or transmission capaSatara.
During the planning stages the Chavaneshwar (C P Patel) 0.8MW wind project wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site information around Satara would have been a major element in the development conclusion Winds around Satara are examined for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to performwithin a project like Chavaneshwar (C P Patel) 0.8MW wind project. This is because of drag The boost in velocity with altitude is most extraordinary close to the surface and is affected by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity rises with altitude and it is more distinct near land and is altered by topography, surface and obstacles.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But this is not always the way it is in hilly areas.
Individual turbines at Chavaneshwar (C P Patel) 0.8MW wind project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric current is elevated in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Chavaneshwar (C P Patel) 0.8MW wind project wind farm
- Name: Chavaneshwar (C P Patel) 0.8MW wind project
- Wind turbine Supplier: Siemens, Model: 2.3-MW Mk II , Units: 44,
- Country: India
- Developer: Enercon India
- State: Maharashtra
- City: Satara
- Owner: C P Patel