Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project wind project was set up in Rajasthan, India It was created in 2009 and is owned by Miraj Products Pvt. Ltd.
It is near Jodhpur.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best location for something like Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project is a steady availability of non-turbulent wind. Additionally, you would not get a turbine Miraj Products Pvt. Ltd like Miraj Products Pvt. Ltd involved if Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project was not built near local demand or transmission capaJodhpur.
During the planning stages the Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been essential to determining site potential as a way to fund the project. Local winds are often monitored for a year or more, and comprehensive wind maps constructed before wind generators are installed.
The wind hits swifter at greater altitudes due to the reduced influence of drag. The boost in velocity with altitude is most remarkable at the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and it is more pronounced near land and is changed by landscape, surface and obstructions.
Wind speeds raising with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, raises the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they don’t affect one another. But this is not always the case in hilly areas.
Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project turbines are connected via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is elevated in voltage with a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and possibly roads to each and every turbine site.
Facts about Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project wind farm
- Name: Bastwa Mataji & Bastwa (Miraj Products Pvt. Ltd) 1.5MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 1.5MW, Units: 2,
- Country: India
- Developer: Suzlon Energy
- State: Rajasthan
- City: Jodhpur
- Owner: Miraj Products Pvt. Ltd