Baramsar (Shri Tirupati Energy) 0.35MW wind project wind project was set up in Rajasthan, India It was brought online in 2004 and is owned by Shri Tirupati Energy.
It is near Jaisalmer.
See below for data.
Generally speaking, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or greater.
An ideal position for a project like Baramsar (Shri Tirupati Energy) 0.35MW wind project could have a near constant flow of non-turbulent wind throughout the year, with a minimum chance of sudden powerful bursts of wind. Additionally, you would not get a turbine Shri Tirupati Energy like Shri Tirupati Energy included if Baramsar (Shri Tirupati Energy) 0.35MW wind project was not built near local demand or transmission capaJaisalmer.
Before building, Baramsar (Shri Tirupati Energy) 0.35MW wind project was probably screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Site data around Jaisalmer would have been a major factor in the development decision Local winds are often supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind hits quicker at greater altitudes because of the reduced effect of drag. The surge in velocity with altitude is most extraordinary at the surface and is impacted by topography, surface roughness, and upwind obstacles such as trees or buildings. Velocity increases with altitude and it is more evident near land and is transformed by landscape, surface and limitations.
Almost always, the increase of wind speeds with growing elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, enhances the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so they really don’t affect each other. But this isn’t necessarily the way it is in hilly areas.
Baramsar (Shri Tirupati Energy) 0.35MW wind project turbines are connected via medium voltage lines and communications.
At a substation, this medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and perhaps roads to each turbine site.
Facts about Baramsar (Shri Tirupati Energy) 0.35MW wind project wind farm
- Name: Baramsar (Shri Tirupati Energy) 0.35MW wind project
- Wind turbine Supplier: Suzlon Energy, Model: 0.35MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Rajasthan
- City: Jaisalmer
- Owner: Shri Tirupati Energy