Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project wind project was installed in Tamil Nadu, India It was in fact brought online in 2004 and is owned by Loyal Textiles Mills Ltd.
It is near Tirunelveli.
See below for data.
Typically, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or higher.
An ideal place for a project like Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project might have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden effective bursts of wind. Additionally, you would not get a turbine Loyal Textiles Mills Ltd like Loyal Textiles Mills Ltd associated if Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project was not built near local demand or transmission capaTirunelveli.
Before construction, Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project was most likely screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Site data around Tirunelveli would have been a major aspect in the ‘development’ choice Winds around Tirunelveli are evaluated for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows quicker at higher altitudes due to the reduced influence of drag. The surge in velocity with altitude is most remarkable near the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity grows with altitude and is also more pronounced near land and is changed by landscape, surface and obstacles.
Almost always, the growth of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, raises the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But micrositing optimizes placement, particularly in hilly areas.
Individual turbines at Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project wind farm
- Name: Ayikudi (Loyal Textiles Mills Ltd) 1.5MW Wind project
- Wind turbine Supplier: Vestas RRB, Model: V47 0.5MW, Units: 3,
- Country: India
- Developer: Neg Micon
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Loyal Textiles Mills Ltd