Ayikudi (KSPL) 0.75 MW wind project wind project was installed in Tamil Nadu, India It was finished in 2005 and is owned by Kutti Spinners Private Limited.
It is near Tirunelveli.
See below for data.
Wind farms, as a general rule require wind speeds of 4.5 metres per second or higher.
The very best location for something like Ayikudi (KSPL) 0.75 MW wind project is a steady availability of non-turbulent wind. Additionally, you would not get a turbine Kutti Spinners Private Limited like Kutti Spinners Private Limited involved if Ayikudi (KSPL) 0.75 MW wind project was not built near local demand or transmission capaTirunelveli.
Before building, Ayikudi (KSPL) 0.75 MW wind project was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. However, Ayikudi (KSPL) 0.75 MW wind project wind farm would have needed more than just meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been vital to determining site potential as a way to fund the project. Local winds are frequently checked for a year or more, and comprehensive wind maps created before wind generators are installed.
Altitude would also possess a part to playwithin a project like Ayikudi (KSPL) 0.75 MW wind project. This is due to drag The rise in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more evident near land and is changed by topography, surface and hurdles.
Generally, the rise of wind speeds with growing elevation follows a wind profile power law, which predicts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, raises the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a range of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But this may not be the case in hilly areas.
Individual turbines at Ayikudi (KSPL) 0.75 MW wind project are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.