Ananthpur (HCL) 4.5MW wind project wind farm is located in Andhra Pradesh, India. It was brought online in 2008 and is owned by Hyderabad Chemicals Ltd.
It is near Kadavakallu, Ananthpur.
See below for data.
As a general rule, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or greater.
A great location for a project like Ananthpur (HCL) 4.5MW wind project might have a near constant flow of non-turbulent wind throughout the year, with a minimum chance of sudden effective bursts of wind. Additionally, you would not get a turbine Hyderabad Chemicals Ltd like Hyderabad Chemicals Ltd included if Ananthpur (HCL) 4.5MW wind project was not built near local demand or transmission capaKadavakallu, Ananthpur.
During the planning stages the Ananthpur (HCL) 4.5MW wind project wind farm would have been checked and validated through wind measurements. However, Ananthpur (HCL) 4.5MW wind project wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been vital to determining site potential as a way to finance the project. Local winds are often supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind blows speedier at higher altitudes as a result of reduced influence of drag. The boost in velocity with altitude is most remarkable close to the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is more distinct near land and is transformed by geography, surface and obstacles.
Commonly, the increase of wind speeds with increasing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the elevation of a turbine, then, raises the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out to make sure they don’t affect one another. But this isn’t necessarily the situation in hilly areas.
Ananthpur (HCL) 4.5MW wind project turbines are connected via medium voltage lines and communications.
At a substation, that medium-voltage electric current is improved in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and probably access roads to each turbine site.
Facts about Ananthpur (HCL) 4.5MW wind project wind farm
- Name: Ananthpur (HCL) 4.5MW wind project
- Wind turbine Supplier: Neg Micon, Model: NM48 0.75MW, Units: 6,
- Country: India
- Developer: Neg Micon
- State: Andhra Pradesh
- City: Kadavakallu, Ananthpur
- Owner: Hyderabad Chemicals Ltd