Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project wind project was set up in Tamil Nadu, India It was brought online in 2004 and is owned by Kanyakumari Wind Farm.
It is near Tirunelveli.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The very best destination for something similar to Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project is a steady availability of non-turbulent wind. An important factor of turbine siting is also access to local demand or transmission capaTirunelveli.
During the planning stages the Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project wind farm would’ve been checked and authenticated through wind measurements. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Site data around Tirunelveli would have been a major aspect in the development final decision Winds around Tirunelveli are examined for at least a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind blows swifter at greater altitudes because of the reduced effect of drag. The surge in velocity with altitude is most spectacular at the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity increases with altitude and it is more evident near land and is changed by geography, surface and limitations.
Ordinarily, the increase of wind speeds with growing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect one another. But this isn’t necessarily the way it is in hilly areas.
Individual turbines at Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric energy is enhanced in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly roads to every turbine site.
Facts about Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project wind farm
- Name: Alaganeri (Kanyakumari Wind Farm) 0.9MW wind project
- Wind turbine Supplier: NEPC India, Model: 0.225MW, Units: 4,
- Country: India
- Developer: NEPC India
- State: Tamil Nadu
- City: Tirunelveli
- Owner: Kanyakumari Wind Farm