Akal (Orient abrasives) 1.5 MW wind Project wind farm is situated in Rajasthan, India. It was in fact brought online in 2010 and is owned by Orient Abrasives Limited.
It is near Akal, Jaisalmer.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or more.
The best destination for something such as Akal (Orient abrasives) 1.5 MW wind Project is a steady supply of non-turbulent wind. Additionally, you wouldn’t get a turbine Orient Abrasives Limited like Orient Abrasives Limited included if Akal (Orient abrasives) 1.5 MW wind Project was not built near local demand or transmission capaAkal, Jaisalmer.
During the planning stages the Akal (Orient abrasives) 1.5 MW wind Project wind farm would’ve been checked and confirmed through wind measurements. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Site information around Akal, Jaisalmer is a major aspect in the development choice Winds around Akal, Jaisalmer are evaluated for over a year or so alongside the introduction of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playwithin a project like Akal (Orient abrasives) 1.5 MW wind Project. This is due to drag The increase in velocity with altitude is most spectacular near the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more obvious near land and is changed by landscape, surface and obstructions.
Wind speeds increasing with altitude is part of a wind energy law. This predicts wind speed rises with the 7th root of altitude. Doubling the height of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. However this may not be the case in hilly areas.
Individual turbines at Akal (Orient abrasives) 1.5 MW wind Project are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric current is enhanced in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each turbine site.
Facts about Akal (Orient abrasives) 1.5 MW wind Project wind farm
- Name: Akal (Orient abrasives) 1.5 MW wind Project
- Wind turbine Supplier: Suzlon Energy, Model: S82 1.5MW, Units: 1,
- Country: India
- Developer: Suzlon Energy
- State: Rajasthan
- City: Akal, Jaisalmer
- Owner: Orient Abrasives Limited