Adankarkulam (James Textiles) 0.75MW Wind Project wind project was set up in Tamil Nadu, India It was completed in 2004 and is owned by James Textiles.
It is near Tirunelveli.
See below for data.
For the most part, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or bigger.
The best destination for a project like Adankarkulam (James Textiles) 0.75MW Wind Project would have a near constant flow of non-turbulent wind year round, with a minimum chance of abrupt potent bursts of wind. An important factor of turbine siting is also access to local requirement or transmission capaTirunelveli.
Before building, Adankarkulam (James Textiles) 0.75MW Wind Project was almost certainly screened on the foundation of a wind atlas, and validated with wind specifications. However, Adankarkulam (James Textiles) 0.75MW Wind Project wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been important to determining site potential in order to finance the project. Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are set up.
Altitude would also possess a part to performin a project like Adankarkulam (James Textiles) 0.75MW Wind Project. This is because of drag The increase in velocity with altitude is most spectacular close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is changed by geography, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the expected power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out to make sure they don’t affect each other. But micrositing optimizes placement, specifically in hilly areas.
Adankarkulam (James Textiles) 0.75MW Wind Project turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires installing of the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Adankarkulam (James Textiles) 0.75MW Wind Project wind farm
- Name: Adankarkulam (James Textiles) 0.75MW Wind Project
- Wind turbine Supplier: Neg Micon, Model: 0.75MW, Units: 1,
- Country: India
- Developer: Neg Micon
- State: Tamil Nadu
- City: Tirunelveli
- Owner: James Textiles