Cerro de Hula wind project was installed in Francisco Morazán, Honduras It was in fact brought online in 2011 and is owned by Globeleq, Mesoamerica Energy.
It is near Santa Ana and San Buenaventura, 20km south of Tegucigalpa.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
A perfect place for a project like Cerro de Hula might have a near constant flow of non-turbulent wind all year long, having a minimum chances of sudden powerful bursts of wind. An important factor of turbine siting is moreover admission to local requirement or transmission capaSanta Ana and San Buenaventura, 20km south of Tegucigalpa.
Before development, Cerro de Hula was probably screened on the foundation of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not enough for correct siting of a large wind power project.
Site info around Santa Ana and San Buenaventura, 20km south of Tegucigalpa is a major aspect in the development choice Winds around Santa Ana and San Buenaventura, 20km south of Tegucigalpa are analysed for at least a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind hits more rapidly at greater altitudes as a result of reduced influence of drag. The boost in velocity with altitude is most spectacular near the surface and is impacted by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and is more obvious near land and is transformed by geography, surface and obstacles.
Generally, the growth of wind speeds with growing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, raises the expected wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Individual turbines at Cerro de Hula are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is elevated in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each and every turbine site.
Facts about Cerro de Hula wind farm
- Name: Cerro de Hula
- Wind turbine Supplier: Wobben Windpower, Model: E82-2.0MW, Units: 15,
- Country: Honduras
- Developer: Globeleq, Mesoamerica Energy
- State: Francisco Morazán
- City: Santa Ana and San Buenaventura, 20km south of Tegucigalpa
- Owner: Globeleq, Mesoamerica Energy