Agrilida/ Veliras (Sitia) wind farm is located in Crete, Greece. It was brought online in 1999 and is owned by Enercon.
It is near Sitia.
See below for data.
In most cases, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or more.
The very best location for something similar to Agrilida/ Veliras (Sitia) would be a steady supply of non-turbulent wind. Additionally, you would not get a turbine Enercon like Enercon associated if Agrilida/ Veliras (Sitia) was not built near local demand or transmission capaSitia.
Before building, Agrilida/ Veliras (Sitia) was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for correct siting of a large wind power project.
Site data around Sitia is a major aspect in the ‘development’ decision Local winds are frequently monitored for a year or more, and detailed wind maps made before wind generators are set up.
Altitude would also have a part to playin a project like Agrilida/ Veliras (Sitia). This is due to drag The rise in velocity with altitude is most spectacular near the surface and is affected by geography, surface roughness, and upwind hurdles such as trees or buildings. Velocity increases with altitude and it is more evident near land and is altered by geography, surface and hurdles.
Wind speeds increasing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, increases the expected wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect each other. But micrositing optimizes placement, specially in hilly areas.
Individual turbines at Agrilida/ Veliras (Sitia) are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.