Eixen wind project was installed in Mecklenburg-Vorpommern, Germany It was completed in 2006 and is owned by .
It is near Eixen.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best position for a project like Eixen would have a near constant flow of non-turbulent wind all year long, with a minimum chances of sudden powerful bursts of wind. An essential aspect of turbine siting is furthermore admittance to local requirement or transmission capaEixen.
During the planning stages the Eixen wind farm would’ve been checked and authenticated through wind measurements. However, Eixen wind farm would have needed more than simply meteorological data and measurements.
Site information around Eixen is a major aspect in the development choice Local winds are frequently watched for a year or more, and comprehensive wind maps constructed before wind generators are set up.
Altitude would also have a part to playwithin a project like Eixen. This is due to drag The rise in velocity with altitude is most dramatic near the surface and is impacted by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity boosts with altitude and is more obvious near land and is changed by terrain, surface and hurdles.
Ordinarily, the growth of wind speeds with increasing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Increasing the altitude of a turbine, then, enhances the expected wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out so that they don’t affect one another. But micrositing optimizes placement, specially in hilly areas.
Eixen turbines are connected via medium voltage lines and communications.
At a substation, this particular medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installing of the collector system and substation, and possibly roads to each and every turbine site.
Facts about Eixen wind farm
- Name: Eixen
- Wind turbine Supplier: Vestas Wind Systems, Model: V90/2000, Units: 8,
- Country: Germany
- Developer: Denker & Wulf
- State: Mecklenburg-Vorpommern
- City: Eixen