Eider wind project was set up in Schleswig-Holstein, Germany It was completed in 2014 and is owned by BWP Eider GmbH & Co. KG.
It is near Eider.
See below for data.
Typically, economic wind generators require a wind speed of 4.5 m/s (16 km/h) or higher.
The best destination for something such as Eider is a steady availability of non-turbulent wind. Additionally, you would not get a turbine BWP Eider GmbH & Co. KG like BWP Eider GmbH & Co. KG included if Eider was not built near local demand or transmission capaEider.
Before building, Eider was probably screened on the basis of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not ample for precise siting of a large wind power project.
Collection of site-specific data for wind speed and direction could have been important to determining site potential as a way to fund the project. Winds around Eider are analysed for over a year or so alongside the creation of detailed maps. Only then are wind turbines installed.
The wind blows faster at greater altitudes due to the reduced influence of drag. The boost in velocity with altitude is most dramatic near the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity boosts with altitude and it is more evident near land and is transformed by terrain, surface and obstructions.
Wind speeds escalating with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the height of a turbine, then, increases the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they’re spaced out in order that they don’t affect each other. But this might not be the case in hilly areas.
Individual turbines at Eider are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is increased in voltage with a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to every turbine site.
Facts about Eider wind farm
- Name: Eider
- Wind turbine Supplier: Nordex, Model: N50/800, Units: 1,
- Country: Germany
- Developer: Vestas Wind Systems
- State: Schleswig-Holstein
- City: Eider
- Owner: BWP Eider GmbH & Co. KG