Eggstedt wind project was set up in Schleswig-Holstein, Germany It was in fact brought online in 2004 and is owned by .
It is near Eggstedt.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
The best location for something such as Eggstedt would be a steady availability of non-turbulent wind. An important factor of turbine siting is moreover access to local requirement or transmission capaEggstedt.
Before construction, Eggstedt was probably screened on the foundation of a wind atlas, and validated with wind specifications. However, Eggstedt wind farm might have needed more than merely meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been crucial to determining site potential in order to fund the project. Local winds are often supervised for a year or more, and detailed wind maps constructed before wind generators are installed.
The wind blows more rapidly at higher altitudes as a result of reduced influence of drag. The increase in velocity with altitude is most remarkable near the surface and is affected by topography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and it is more pronounced near land and is changed by topography, surface and hurdles.
Wind speeds increasing with altitude is part of a wind energy law. This forecasts wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, boosts the predicted wind speeds by 10%, and the anticipated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is defined between each turbine in a fully developed wind farm. But micrositing maximizes placement, specifically in hilly areas.
Eggstedt turbines are related via medium voltage lines and communications.
At a substation, this particular medium-voltage electric energy is improved in voltage with a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installation of the collector system and substation, and possibly roads to every turbine site.
Facts about Eggstedt wind farm
- Name: Eggstedt
- Wind turbine Supplier: Enercon, Model: E-66 1.8MW, Units: 9,
- Country: Germany
- Developer: Senvion
- State: Schleswig-Holstein
- City: Eggstedt