Ebersdorf wind project was installed in Lower Saxony, Germany It was created in 2002 and is owned by .
It is near Ebersdorf.
See below for data.
Wind farms, as a general rule need wind speeds of 4.5 metres per second or higher.
A perfect place for a project like Ebersdorf would have a near constant flow of non-turbulent wind throughout the year, having a minimum probability of sudden effective bursts of wind. Additionally, you would not get a turbine like included if Ebersdorf was not built near local demand or transmission capaEbersdorf.
During the planning stages the Ebersdorf wind farm would have been checked and validated through wind measurements. However, Ebersdorf wind farm might have needed more than simply meteorological data and measurements.
Collection of site-specific data for wind speed and direction could have been crucial to determining site potential as a way to finance the project. Local winds are often examined for a year or more, and comprehensive wind maps built before wind generators are installed.
Altitude would also have a part to playwithin a project like Ebersdorf. This is because of drag The rise in velocity with altitude is most dramatic close to the surface and is affected by topography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and is more distinct near land and is altered by landscape, surface and obstructions.
Wind speeds raising with altitude is part of a wind energy law. This Lower Saxonys wind speed rises with the 7th root of altitude. Doubling the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the anticipated power by 34%.
In general, a distance of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But this might not be the case in hilly areas.
Ebersdorf turbines are related via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is increased in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps roads to each turbine site.
Facts about Ebersdorf wind farm
- Name: Ebersdorf
- Wind turbine Supplier: Nordex, Model: N60/1300, Units: 3,
- Country: Germany
- Developer: Enercon
- State: Lower Saxony
- City: Ebersdorf