Dubener Platte III wind project was set up in Brandenburg, Germany It was created in 2011 and is owned by BKW.
It is near Dubener.
See below for data.
As a general rule, economic wind turbines require a wind speed of 4.5 m/s (16 km/h) or larger.
The best location for something like Dubener Platte III is a steady supply of non-turbulent wind. Additionally, you would not get a turbine BKW like BKW associated if Dubener Platte III was not built near local demand or transmission capaDubener.
During the planning stages the Dubener Platte III wind farm would’ve been checked and confirmed through wind measurements. However, Dubener Platte III wind farm would have needed more than merely meteorological data and measurements.
Assortment of site-specific data for wind speed and direction might have been vital to determining site potential as a way to fund the project. Winds around Dubener are examined for over a year or so alongside the development of detailed maps. Only then are wind turbines installed.
The wind hits faster at greater altitudes because of the reduced effect of drag. The boost in velocity with altitude is most dramatic at the surface and is affected by geography, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is more distinct near land and is changed by topography, surface and obstructions.
Wind speeds growing with altitude is part of a wind energy law. This anticipates wind speed rises with the 7th root of altitude. Increasing the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But this may not be the situation in hilly areas.
Individual turbines at Dubener Platte III are interconnected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this particular medium-voltage electric energy is elevated in voltage using a transformer for connection to the high voltage transmission system. Construction of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each and every turbine site.
Facts about Dubener Platte III wind farm
- Name: Dubener Platte III
- Wind turbine Supplier: Suzlon Energy, Model: S88/2100, Units: 31,
- Country: Germany
- Developer: Ventotec
- State: Brandenburg
- City: Dubener
- Owner: BKW