Drelsdorf wind project was set up in Schleswig-Holstein, Germany It was created in 2000 and is owned by .
It is near Drelsdorf.
See below for data.
Generally speaking, economic wind machines require a wind speed of 4.5 m/s (16 km/h) or greater.
The best location for a project like Drelsdorf would have a near constant flow of non-turbulent wind throughout the year, having a minimum chances of sudden potent bursts of wind. Additionally, you wouldn’t get a turbine like involved if Drelsdorf was not built near local demand or transmission capaDrelsdorf.
During the planning stages the Drelsdorf wind farm would have been checked and endorsed through wind measurements. Meteorological wind data alone is usually not sufficient for accurate siting of a large wind power project.
Site data around Drelsdorf would have been a major aspect in the development decision Local winds are often examined for a year or more, and detailed wind maps built before wind generators are installed.
The wind hits sooner at greater altitudes as a result of reduced influence of drag. The rise in velocity with altitude is most dramatic close to the surface and is affected by landscape, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and it is more obvious near land and is changed by geography, surface and obstacles.
Almost always, the rise of wind speeds with increasing height follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, boosts the anticipated wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect one another. But micrositing maximizes placement, specially in hilly areas.
Drelsdorf turbines are connected via medium voltage lines and communications.
At a substation, that medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires installing of the collector system and substation, and possibly access roads to each and every turbine site.
Facts about Drelsdorf wind farm
- Name: Drelsdorf
- Wind turbine Supplier: Nordex, Model: N100/2500, Units: 2,
- Country: Germany
- Developer: Vestas Wind Systems
- State: Schleswig-Holstein
- City: Drelsdorf