Dorndorf wind farm is located in Thuringia, Germany. It was completed in 2010 and is owned by .
It is near Dorndorf.
See below for data.
Typically, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or greater.
The best place for a project like Dorndorf would have a near constant flow of non-turbulent wind all year long, having a minimum chance of abrupt powerful bursts of wind. An essential aspect of turbine siting is also access to local requirement or transmission capaDorndorf.
Before construction, Dorndorf was almost certainly screened on the basis of a wind atlas, and validated with wind measurements. Meteorological wind data alone is usually not adequate for precise siting of a large wind power project.
Assortment of site-specific data for wind speed and direction might have been essential to determining site potential to be able to fund the project. Local winds are frequently checked for a year or more, and detailed wind maps constructed before wind generators are installed.
Altitude would also possess a part to performwithin a project like Dorndorf. This is because of drag The rise in velocity with altitude is most spectacular near the surface and is impacted by geography, surface roughness, and upwind obstacles such as trees or buildings. Velocity rises with altitude and is also more distinct near land and is changed by topography, surface and obstructions.
Normally, the increase of wind speeds with growing elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the predicted wind speeds by 10%, and the anticipated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. However this is not always the situation in hilly areas.
Individual turbines at Dorndorf are interlocked with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is improved in voltage using a transformer for connection to the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably access roads to each and every turbine site.