Dobberzin wind project was set up in Brandenburg, Germany It was in fact brought online in 2002 and is owned by .
It is near Dobberzin.
See below for data.
For the most part, economic wind power generators require a wind speed of 4.5 m/s (16 km/h) or bigger.
A great position for a project like Dobberzin would have a near constant flow of non-turbulent wind all year round, with a minimum chance of abrupt potent bursts of wind. An important factor of turbine siting is also admission to local requirement or transmission capaDobberzin.
During the planning stages the Dobberzin wind farm would have been checked and authenticated through wind measurements. However, Dobberzin wind farm might have needed more than just meteorological data and measurements.
Assortment of site-specific data for wind speed and direction would have been crucial to determining site potential as a way to fund the project. Winds around Dobberzin are examined for over a year or so plus the creation of detailed maps. Only then are wind turbines installed.
Altitude would also possess a part to playin a project like Dobberzin. This is because of drag The increase in velocity with altitude is most spectacular at the surface and is affected by landscape, surface roughness, and upwind limitations such as trees or buildings. Velocity boosts with altitude and is also more pronounced near land and is altered by topography, surface and obstructions.
Generally, the increase of wind speeds with raising elevation follows a wind profile power law, which forecasts that wind speed rises proportionately to the seventh root of altitude. Doubling the elevation of a turbine, then, enhances the anticipated wind speeds by 10%, and the predicted power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is about between each turbine in a fully developed wind farm. But micrositing increases placement, specially in hilly areas.
Individual turbines at Dobberzin are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, this kind of medium-voltage electric current is increased in voltage using a transformer for link with the high voltage transmission system. Construction of a land-based wind farm requires installation of the collector system and substation, and possibly roads to every turbine site.
Facts about Dobberzin wind farm
- Name: Dobberzin
- Wind turbine Supplier: Senvion, Model: 3.4M104, Units: 3,
- Country: Germany
- Developer: Teut
- State: Brandenburg
- City: Dobberzin