Detmold wind project was set up in North Rhine-Westphalia, Germany It was completed in 2010 and is owned by SWM.
It is near Detmold.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or higher.
The best destination for something such as Detmold would be a steady supply of non-turbulent wind. An essential aspect of turbine siting is also admittance to local requirement or transmission capaDetmold.
Before building, Detmold was most likely screened on the foundation of a wind atlas, and validated with wind specifications. Meteorological wind data alone is usually not adequate for correct siting of a large wind power project.
Collection of site-specific data for wind speed and direction would have been crucial to determining site potential in order to finance the project. Local winds are often checked for a year or more, and comprehensive wind maps built before wind generators are set up.
The wind hits speedier at greater altitudes due to the reduced influence of drag. The boost in velocity with altitude is most dramatic close to the surface and is impacted by landscape, surface roughness, and upwind obstructions such as trees or buildings. Velocity rises with altitude and is more distinct near land and is altered by geography, surface and obstructions.
Generally, the growth of wind speeds with escalating elevation follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the altitude of a turbine, then, boosts the predicted wind speeds by 10%, and the estimated power by 34%.
In general, a length of 7D (7 × Rotor Diameter of the Wind Turbine) is scheduled between each turbine in a fully developed wind farm. But this isn’t necessarily the case in hilly areas.
Individual turbines at Detmold are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, that medium-voltage electric energy is improved in voltage using a transformer for connection to the high voltage transmission system. Development of a land-based wind farm requires setting up the collector system and substation, and perhaps access roads to each turbine site.
Facts about Detmold wind farm
- Name: Detmold
- Wind turbine Supplier: Enron Wind, Model: 1.5MW, Units: 107,
- Country: Germany
- State: North Rhine-Westphalia
- City: Detmold
- Owner: SWM