Daskow wind project was installed in Mecklenburg-Vorpommern, Germany It was completed in 2000 and is owned by .
It is near Daskow.
See below for data.
Wind farms, as a general rule call for wind speeds of 4.5 metres per second or more.
An ideal position for a project like Daskow might have a near constant flow of non-turbulent wind throughout the year, having a minimum likelihood of abrupt powerful bursts of wind. Additionally, you wouldn’t get a turbine like involved if Daskow was not built near local demand or transmission capaDaskow.
Before development, Daskow was probably screened on the foundation of a wind atlas, and validated with wind measurements. However, Daskow wind farm might have needed more than just meteorological data and measurements.
Site data around Daskow would have been a major element in the ‘development’ decision Local winds are often checked for a year or more, and detailed wind maps made before wind generators are installed.
The wind hits swifter at higher altitudes due to the reduced effect of drag. The surge in velocity with altitude is most dramatic close to the surface and is impacted by geography, surface roughness, and upwind limitations such as trees or buildings. Velocity increases with altitude and it is more distinct near land and is transformed by geography, surface and obstructions.
Almost always, the increase of wind speeds with increasing height follows a wind profile power law, which anticipates that wind speed rises proportionately to the seventh root of altitude. Doubling the height of a turbine, then, enhances the predicted wind speeds by 10%, and the estimated power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out so that they don’t affect each other. But micrositing increases placement, particularly in hilly areas.
Daskow turbines are related via medium voltage lines and communications.
At a substation, it medium-voltage electric energy is improved in voltage with a transformer for link with the high voltage transmission system. Development of a land-based wind farm requires installation of the collector system and substation, and possibly roads to each and every turbine site.
Facts about Daskow wind farm
- Name: Daskow
- Wind turbine Supplier: NEPC India, Model: 0.75 MW, Units: 4,
- Country: Germany
- Developer: WIDEMAG
- State: Mecklenburg-Vorpommern
- City: Daskow