Crussow West I wind farm is situated in Brandenburg, Germany. It was finished in 2009 and is owned by .
It is near Crussow.
See below for data.
Wind farms, as a general rule demand wind speeds of 4.5 metres per second or more.
A great position for a project like Crussow West I might have a near constant flow of non-turbulent wind all year long, with a minimum probability of abrupt effective bursts of wind. An important factor of turbine siting is moreover access to local requirement or transmission capaCrussow.
Before development, Crussow West I was probably screened on the foundation of a wind atlas, and validated with wind measurements. However, Crussow West I wind farm might have needed more than merely meteorological data and measurements.
Site info around Crussow is a major element in the ‘development’ choice Local winds are often checked for a year or more, and detailed wind maps built before wind generators are set up.
The wind blows faster at greater altitudes due to the reduced effect of drag. The increase in velocity with altitude is most remarkable at the surface and is affected by landscape, surface roughness, and upwind hurdles such as trees or buildings. Velocity boosts with altitude and it is more evident near land and is transformed by landscape, surface and limitations.
Wind speeds increasing with altitude is part of a wind energy law. This Brandenburgs wind speed rises with the 7th root of altitude. Increasing the elevation of a turbine, then, raises the anticipated wind speeds by 10%, and the predicted power by 34%.
The distance of 7x Rotor Diameter is placed between each turbine, ie they are spaced out in order that they don’t affect one another. But micrositing maximizes placement, particularly in hilly areas.
Individual turbines at Crussow West I are connected with a medium voltage (usually 34.5 kV) power collection system and communications network.
At a substation, it medium-voltage electric current is elevated in voltage using a transformer for link with the high voltage transmission system. Building of a land-based wind farm requires setting up the collector system and substation, and probably roads to every turbine site.